S5720-32X-EI-24S-AC
S5720-32X-EI-24S-AC Huawei S5720 Series Switch
S5720-32X-EI-24S-AC Huawei S5720 Series Switch Overview
Check Now >
S5720-32X-EI-24S-AC Overview
Huawei S5720-32X-EI-24S-AC Gigabit Switch provides resilient, energy-efficient GE ports for access switching in data centers, and aggregation switching in enterprise campus networks. With twenty-four 1,000 Base-X SFP ports, four 10/100/1,000 Base-T Ethernet ports and four 10G SFP+ ports, its performance enhancements include advanced processing hardware, and large MAC address and routing tables; Super Virtual Fabric (SVF) support enables intelligent virtualization, iStack clustering, and operation in N + 1 backup mode for simplified O&M and high availability. Mature IPv6 features ensure smooth migration to next-generation IP networking. Huawei S5720-32X-EI-24S-AC Gigabit Switch is dedicated to helping customers build a reliable, secure and high performance next-generation IT network.
Quick Specs
Figure 1 shows the appearance of Huawei S5720-32X-EI-24S-AC switch.
Table 1 shows the Quick Specs.
Product Code | S5720-32X-EI-24S-AC |
Fixed Ports | 24 x 100/1,000 Base-X SFP, 4 x 10/100/1,000 Base-T, 4 x 10 Gig SFP+ |
Extended Slots | NA |
Memory (RAM) | 2 GB |
Flash | 340 MB |
MAC Address Table Size Forwarding Performance | 64 MAC |
Forwarding Performance | 102 Mpps |
Switching Capacity | 598 Gbit/s |
Power Supply | Double hot-swappable AC/DC power supplies, one AC/DC power module is configured by default |
Voltage Required | AC Rated voltage range: 100V to 240V AC, 50/60 Hz Maximum voltage range: 90V to 264V AC, 47 Hz/63 Hz |
Front Power Input | Yes |
Typical Power Consumption | 55.5W |
Dimensions (W x D x H) | 442 mm x 220 mm x 43.6 mm |
Weight | 4.44 kg |
Product Details
Figure 2 shows the front panel of Huawei S5720-32X-EI-24S-AC switch.
Note:
① | Twenty-four 10/100/1000BASE-T ports | ② | Four 10/100/1000BASE-T ports |
③ | Four 10GE SFP+ ports | ④ | One mini USB port |
⑤ | One ETH management port | ⑥ | One USB port |
⑦ | AC socket | ⑧ | Jack for AC terminal locking latch |
⑨ | One console port |
|
|
* The AC terminal locking latch is not delivered with the switch.
*AC socket is used with an AC power cable.
*The console port is used with a console cable. The console cable is not delivered with the switch and needs to be separately purchased if needed.
Figure 3 shows the back panel of Huawei S5720-32X-EI-24S-AC switch.
Note:
① | Ground screw | ② | Two QSFP+ stack optical ports |
③ | RPS socket |
|
|
*The ground screw is used with a ground cable.
* The RPS socket is used with an RPS cable, which is not hot swappable.
The Optical Modules
Table 2 shows the recommended optical modules.
Model | Description |
GE-SFP Optical Transceiver | |
eSFP-GE-SX-MM850 | Optical Transceiver, eSFP, GE, Multi-mode Module(850nm,0.55km,LC) |
SFP-GE-LX-SM1310 | Optical Transceiver, eSFP, GE, Single-mode Module(1310nm,10km,LC) |
S-SFP-GE-LH40-SM1310 | Optical Transceiver, eSFP, GE, Single-mode Module(1310nm,40km,LC) |
S-SFP-GE-LH40-SM1550 | Optical Transceiver, eSFP, GE, Single-mode Module(1550nm,40km,LC) |
SFP-1000BaseT | Electrical Transceiver, SFP, GE, Electrical Interface Module(100m,RJ45) |
FE-SFP Optical Transceiver | |
SFP-FE-SX-MM1310 | Optical Transceiver,SFP,100M/155M,Multi-mode Module(1310nm,2km,LC) |
eSFP-FE-LX-SM1310 | Optical Transceiver,eSFP,100M/155M,Single-mode Module(1310nm,15km,LC) |
S-SFP-FE-LH40-SM1310 | Optical Transceiver, eSFP, FE, Single-mode Module(1310nm,40km,LC) |
10G-SFP+ Optical Transceiver | |
SFP-10G-USR | 10GBase-USR Optical Transceiver,SFP+,10G,Multi-mode Module(850nm,0.1km,LC) |
OMXD30000 | Optical Transceiver,SFP+,10G,Multi-mode Module(850nm,0.3km,LC) |
OSX010000 | Optical Transceiver,SFP+,10G,Single-mode Module(1310nm,10km,LC) |
Compare with Similar Item
Table 3 shows the comparison of Huawei S5720-32P-EI-AC, S5720-32X-EI-AC and S5720-32X-EI-24S-AC.
Models | S5720-32P-EI-AC | S5720-32X-EI-AC | S5720-32X-EI-24S-AC |
Fixed Ports | 24 x 10/100/1,000 Base-T, 4 x 100/1,000 Base-X SFP, 4 Gig SFP | 24 x 10/100/1,000 Base-T Ethernet ports, 4 x 100/1,000 Base-X SFP ports, 4 x 10G SFP+ ports | 24 x 100/1,000 Base-X SFP ports, 4 x 10/100/1,000 Base-T Ethernet ports, 4 x 10G SFP+ ports |
Extended Slots | NA | NA | NA |
Power Supply | AC power supply, supporting RPS, power socket on the front panel | AC power supply, supporting RPS, power socket on the front panel | AC power supply, supporting RPS, power socket on the front panel |
Forwarding Performance | 48 Mpps | 102 Mpps | 102 Mpps |
Switching Capacity | 598 Gbit/s | 598 Gbit/s | 598 Gbit/s |
FrontPower Input | AC: Yes | AC: Yes | AC: Yes |
Power Consumption | 39.8W | 40.9W | 55.5W |
S5720-32X-EI-24S-AC Huawei S5720 Series Switch Specification
S5720-32X-EI-24S-AC Specification
S5720-32X-EI-24S-AC Specification | |
MAC address table | IEEE 802.1d compliance MAC address learning and aging Static, dynamic, and blackhole MAC address entries Packet filtering based on source MAC addresses MAC address entries: |
VLAN | 4K VLANs Guest VLAN and voice VLAN GVRP MUX VLAN VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports 1:1 and N:1 VLAN Mapping SuperVLAN(supported by the S5700-SI/S5700-EI/S5700-HI series) |
Ring protection | RRPP ring topology and RRPP multi-instance Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover SEP ERPS(G.8032)(supported by the S5700-LI/S5700-SI/S5700-EI/S5700-HI series) STP, RSTP, and MSTP BPDU protection, root protection, and loop protection BPDU Tunnel |
Reliability | Ethernet OAM (IEEE 802.3ah and 802.1ag) ITU-Y.1731 DLDP LACP E-Trunk(supported by the S5700-SI/S5700-EI/S5700-HI series) BFD for OSPF, BFD for IS-IS, BFD for VRRP, and BFD for PIM (supported by the S5700-EI/S5700-HI series) |
MPLS features | MPLS L3VPN MPLS L2VPN(VPWS/VPLS) MPLS-TE MPLS QoS Notes: supported by S5710-EI, S5700-HI and S5710-HI |
IP routing | Static routing RIPv1, RIPv2 and RIPng,ECMP(supported by the S5700-SI/S5700-EI/S5700-HI series) OSPF, OSPFv3, IS-IS, IS-ISv6, BGP and BGP4+ (supported by the S5700-EI/S5700-HI series) |
IPv6 features | Neighbor Discovery (ND) Path MTU (PMTU) IPv6 ping, IPv6 tracert, and IPv6 Telnet ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type MLD v1/v2 snooping 6to4 tunnel, ISATAP tunnel, and manually configured tunnel(supported by the S5700-SI/S5700-EI/S5700-HI series) |
Multicast | IGMP v1/v2/v3 snooping and IGMP fast leave Multicast forwarding in a VLAN and multicast replication between VLANs Multicast load balancing among member ports of a trunk Controllable multicast Port-based multicast traffic statistics IGMP v1/v2/v3, PIM-SM, PIM-DM, PIM-SSM, MSDP (supported by the S5700-EI/S5700-HI series) |
QoS/ACL | Rate limiting on packets sent and received by an interface Packet redirection Port-based traffic policing and two-rate three-color CAR Eight queues on each port WRR, DRR, SP, WRR+SP, and DRR+SP queue scheduling algorithms WRED (supported by the S5710-EI and S5700-HI) Re-marking of the 802.1p priority and DSCP priority Packet filtering at Layers 2 through 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP port number, protocol type, and VLAN ID Rate limiting in each queue and traffic shaping on ports |
Security | User privilege management and password protection DoS attack defense, ARP attack defense, and ICMP attack defense Binding of the IP address, MAC address, interface, and VLAN Port isolation, port security, and sticky MAC MFF Blackhole MAC address entries Limit on the number of learned MAC addresses 802.1x authentication and limit on the number of users on an interface AAA authentication, RADIUS authentication, HWTACACS authentication, and NAC SSH v2.0 Hypertext Transfer Protocol Secure (HTTPS) CPU defense Blacklist and whitelist |
Access Security | DHCP Relay, DHCP Server, DHCP Snooping, DHCP Security |
Management and maintenance | Virtual cable test Port mirroring and RSPAN (remote port mirroring) Remote configuration and maintenance using Telnet SNMP v1/v2c/v3 RMON Web NMS HGMP System logs and alarms of different levels 802.3az EEE (supported by the S5700(S)-LI, S5710-EI, S5700-HI and S5710-HI) Dying gasp (supported by the S5700-HI, S5710-HI and S5700(S)-LI(except battery LAN switches) NetStream (supported by the S5710-EI, S5700-HI and S5710-HI) sFlow(supported by the S5700(S)-LI/S5700-EI/S5700-HI series) |
Interoperability | Supports VBST (Compatible with PVST/PVST+/RPVST) Supports LNP (Similar to DTP) Supports VCMP (Similar to VTP) |
Operating environment | Operating temperature: 0℃–50℃ Relative humidity: 10%–90% (non-condensing) |
Input voltage | AC: Rated voltage range: 100 V to 240 V AC, 50/60 Hz Maximum voltage range: 90 V to 264 V AC, 47/63 Hz DC: Rated voltage range: –48 V to –60 V, DC Maximum voltage range: –36 V to –72 V DC Note: PoE-support switches do not use DC power supplies. |
S5720-32X-EI-24S-AC Huawei S5720 Series Switch Warranty
 | Low Price Guarantee |  | Quality Assurance |
 | 100% Money Back Guarantee |  | Commodity Refund Guarantee |
 | Diversified and Flexible Transportation Services |  | Standard Policy |
