FAP-431F-C is one of the FortiAP 431F Indoor Wireless Access Point,Tri radio (2x 802.11 a/b/g/n/ac/ax, 4x4 MIMO and 1x 802.11 a/b/g/n/ac Wave 2, 2x2 MU-MIMO), internal antennas, 1x 100/1000/2500 Base-T RJ45, 1x 10/100/1000 Base-T RJ45, BT/BLE, 1x Type A USB, Console Port (RJ45). Ceiling/wall mount kit included. Region Code C
The FAP-431F-C AP can provide 24/7 scanning across both bands while still providing access on both the 2.4 and 5 GHz bands. The integrated BLE radio can be used for beacons and locationing applications.
Hardware | ||
Hardware Type | Indoor AP | |
Number of Radios | 3 + 1 BLE | |
Number of Antennas | 5 Internal + 1 BLE Internal | |
Antenna Type and Peak Gain | 5 Internal + 1 BLE Internal | |
Frequency Bands (GHz) | 2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, 5.725–5.850 | |
Radio 1 Capabilities | Frequency Band: 2.4GHz Channel Width: 4x4 20/40 MHz Modulation: BPSK, QPSK, QAM64, QAM256, and QAM1024 MIMO Chains: 4x4 Service |
|
Radio 2 Capabilities | Frequency Band: 5.0GHz Channel Width: 4x4 20/40/80MHz and 2x2 160MHz Contiguous Modulation: BPSK, QPSK, QAM64, QAM256, and QAM1024 MIMO Chains: 4x4 Service |
|
Radio 3 Capabilities | Frequency Bands: 2.4/5.0 GHz MIMO chains: 1x1 frequency scanning | |
Maximum Data Rate | Radio 1: up to 1147 Mbps Radio 2: up to 2402 Mbps Radio 3: scan only |
|
Bluetooth Low Energy Radio | Bluetooth scanning and iBeacon advertisement @ 6 dBm max TX power | |
Interfaces | 1x 100/1000/2500 Base-T RJ45, 1 x 10/100/1000 Base-T RJ45, 1x Type A USB, 1x RS-232 RJ45 Serial Port |
|
Power over Ethernet (PoE) | 1 x 802.3at PoE default | |
Simultaneous SSIDs | Up to 16 (14 if background scanning enabled) | |
EAP Type(s) | EAP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST | |
User/Device Authentication | WPA™, WPA2™, and WPA3™ with 802.1x or Preshared key, WEP, Web Captive Portal, MAC blocklist and allowlist | |
Maximum Tx Power (Conducted) | Radio 1: 2.4 GHz 24 dBm / 251 mW (4 chains combined)* Radio 2: 5 GHz 23 dBm / 200 mW (4 chains combined)* Radio 3: NA |
|
Kensington Lock | Yes | |
IEEE Standards | 802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h, 802.11i,802.11j, 802.11k, 802.11n, 802.11r, 802.11v, 802.11w, 802.11ac, 802.11ax (Wi-Fi 6), 802.1Q, 802.1X, 802.3ad, 802.3af, 802.3at, 802.3az, 802.3bz |
|
SSID Types Supported | Local-Bridge, Tunnel, and Mesh | |
Per Radio Client Capacity | 512 clients per radio (Radio1 and Radio2) | |
Cellular Co-existence | Yes | |
LED Off Mode | Yes | |
Reset Button | Yes | |
Advanced 802.11 Features | ||
OFDMA | Yes (UL and DL) | |
2.4 GHz OFDMA | Yes | |
Spatial Reuse (BSS Coloring) | Yes | |
UL MU-MIMO 802.11ax mode | Yes | |
DL-MU-MIMO | Yes | |
HE-MU-MIMO | Yes | |
Enhanced Target Wake Time (TWT) | Yes | |
ZeroWait DFS/Agile DFS | No | |
Wireless Monitoring Capabilities | ||
Rogue Scan radio modes | Background, Dedicated | |
WIPS / WIDS radio modes | Background, Dedicated (recommended) | |
Packet Sniffer Mode | Yes | |
Spectrum Analyzer | Yes | |
Dimensions | ||
Length x Width x Height | 8.27 x 8.27 x 2.22 inches (210 x 210 x 56.5 mm) | |
Weight | 2.16 lbs (0.98 kg) | |
Mounting Options | Ceiling, T-Rail, and Wall | |
Included Accessories | Standard Mount kit for Ceiling, T-Rail, and Wall | |
Environment | ||
Power Supply | SP-FAP400-PA-XX or GPI-130 | |
Power Consumption (Maximum) | 24.5 W | |
Humidity | 5 - 90% non condensing | |
Operating / Storage Temperature | 32–113°F (0–45°C) / -31–-94°F (-35–70°C) | |
Directives | Low Voltage Directive • RoHS | |
UL2043 Plenum Material | No | |
Mean Time Between Failures | > 10 Years | |
Surge Protection Built In | Yes | |
Hit-less PoE Failover | Yes | |
Certifications | ||
WiFi Alliance Certified | Yes | |
DFS | FCC, IC, CE, Japan, Korea, Taiwan | |
Warranty | ||
Limited Lifetime Warranty | Yes |
Low Price Guarantee | ![]() | Quality Assurance | |
100% Money Back Guarantee | Commodity Refund Guarantee | ||
Diversified and Flexible Transportation Services | ![]() | Standard Policy |