FAP-231G-T is categorized as the FortiAP-231G Indoor Wireless AP, which provides Tri radio (Wi-Fi-6E IEEE 802.11ax Tri-band 2.4/5/6GHz and dual 5G operation 2+2+2 2 streams 3 radios) [Note: 6GHz band not available in all regulatory domains], internal antennas, 1x10/100/1000 RJ45 , 1x 100/1000/2500 Base-T RJ45, BT/BLE, 1x Type A USB, Console Port (RJ45). Ceiling/wall mount kit included. Region Code T
Use Cases of FortiAP 231G
FAP-231G allows for a versatile collection of installation topologies with options to fit any enterprise.
Campus
A single building with multiple floors, or a corporate or education campus with a group of large buildings.
• High-capacity designs including Dual 5GHz and tri-band with Wi-Fi 6E allow a maximal number of client devices to attach to the network at the same time without over-air congestion
• Complete NOC functionality with network visibility and AIOps simplify a complex network deployment into a solution manageable by IT teams of any size
Branch Office / SD-Branch
A highly distributed number of small sites, often with no on-site IT.
• Built in NAC functions* allow secure onboarding of devices at remote locations where IT doesn’t have reliable visibility
• Management orchestration with zero-touch deployment allows for quick and easy rollouts without the need for skilled installers at each site
Micro Branch
Ultra small sites that still fall under IT’s responsibility.
• Can act as a SASE endpoint as a foundation for zero-trust network access (ZTNA)
• Simple management and provisioning through FortiSASE interface
Remote Workers
A remote AP installed at a worker’s home or at micro-branch office space.
• Split tunneling allows local traffic to remain local while sending other traffic to the data center for inspection when needed
• Desktop mounting options for wall-plate models allow the use of Ethernet as well as Wi-Fi connectivity while leveraging the same secure tunnel
SMB
Single site or small collection of sites with limited IT resources.
• Built-in NAC functions* bring security to the wireless network with no need to install and manage additional products
• Network and security convergence decreases management overhead while keeping the network secure
FORTIAP 231G | ||
---|---|---|
Hardware | ||
Hardware Type | Indoor AP | |
Number of Radios | 3 + 1 BLE | |
Number of Antennas | Internal x2 Dual band Wi-Fi + x2 Tri-band Wi-Fi & Scanning + 1 Single band 2.4GHz BLE/ ZigBee | |
Antenna Type and Peak Gain | PIFA antenna. Dual band: 4.5 dBi for 2.4GHz, 5.5 dBi for 5 GHz Tr-band: 4.5 dBi for 2.4GHz, 5.5 dBi for 5 GHz & 5.5dBi for 6GHz band BLE antenna: 4.0dBi for 2.4Ghz | |
Frequency Bands (GHz) | 2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, 5.725–5.850, 5.925–6.425, 6.425–6.525, 6.525–7, 5.925–6.875, 6.875–7.125 | |
Radio 1 Capabilities | Frequency band: 2.4GHz Channel width: 20/40MHz Modulation: BPSK, QPSK, 64/256/1024 QAM MIMO Chains: 2x2 Service | |
Radio 2 Capabilities | Frequency band: 5.0GHz Channel width: 20/40/80/80+80MHz Modulation: BPSK, QPSK, 64/256/1024 QAM MIMO Chains: 2x2 Service | |
Radio 3 Capabilities | Frequency bands: 6.0GHz Channel width: 20/40/80/160MHz Modulation: BPSK, QPSK, 64/256/1024 QAM MIMO Chains: 2x2 Service and scanning | |
Maximum Data Rate | Radio 1: up to 574 Mbps Radio 2: up to 1201 Mbps Radio 3: : Up to 2401 Mbps | |
Bluetooth Low Energy Radio | Bluetooth scanning and iBeacon advertisement @ 10 dBm max TX power | |
Interfaces | 1 100/1000/2500 Base-T RJ45, 1 10/100/1000 Base-T RJ45, 1x Type 3.0 USB, 1 RS-232 RJ45 Serial Portt | |
Power over Ethernet (PoE) | 1 x 802.3at PoE default | |
Simultaneous SSIDs | Up to 24 | |
EAP Type(s) | EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST | |
User/Device Authentication | WPA™, WPA2™, and WPA3™ with 802.1x or preshared key, WEP, Web Captive Portal, MAC blocklist & allowlist | |
Maximum Tx Power (Conducted) | Radio 1: 2.4GHz: 23 dBm / 200 mW (2 chains combined) Radio 2: 23 dBm / 158 mW (2 chains combined) Radio 3: 6GHz: 21 dBm 80 mW (2 chains combined @ 160MHz BW) | |
Kensington Lock | Yes | |
IEEE Standards | 802.11a, 802.11b, 802.11e, 802.11g, 802.11h, 802.11i, 802.11j, 802.11k, 802.11n, 802.11r, 802.11v, 802.11ac, 802.11ax, 802.1X, 802.3ad, 802.3af, 802.3at, 802.3az | |
SSID Types Supported | Local-Bridge, Tunnel, and Mesh | |
Per Radio Client Capacity | Up to 512 clients per radio (Radio1, Radio2 and Radio3) | |
Cellular Co-existence | Yes | |
LED Off Mode | Yes | |
Advanced 802.11 Features | ||
OFDMA | Yes | |
Spatial Reuse (BSS Coloring) | Yes | |
UL MU-MIMO | Yes | |
DL-MU-MIMO | Yes | |
Enhanced Target Wake Time (TWT) | Yes | |
ZeroWait DFS | No | |
Wireless Monitoring Capabilities | ||
Rogue Scan radio modes | Background, Dedicated | |
WIPS / WIDS radio modes | Background, Dedicated (recommended) | |
Packet Sniffer Mode | Yes | |
Spectrum Analyzer | Yes | |
Dimensions | ||
Length x Width x Height | 7.18 x 7.18 x 2.12 inches (182.4 x 182.4 x 54.0 mm) | |
Weight | 1.75 lbs (0.8 kg) | |
Mounting Options | Ceiling, T-Rail, and Wall | |
Included Accessories | Standard Mount kit for Ceiling, T-Rail, and Wall | |
Environment | ||
Power Supply | SP-FAP400-PA-XX or 802.3at PoE (GPI-130) | |
Power Consumption (Maximum) | Depends on PoE connected | |
Humidity | 5 - 90% non condensing | |
Operating / Storage Temperature | 32°–122°F (0° - 50°C) / -22°–158°F (-30°–70°C) | |
Directives | Low Voltage Directive • RoHS | |
UL2043 Plenum Material | Yes | |
Mean Time Between Failures | > 10 Years | |
IP Rating | N/A | |
Surge Protection Built In | Yes | |
Hit-less PoE Failover | N/A | |
Certifications | ||
WiFi Alliance Certified | Yes | |
DFS | CE | |
Warranty | ||
Limited Lifetime Warranty | Yes |
Low Price Guarantee | ![]() | Quality Assurance | |
100% Money Back Guarantee | Commodity Refund Guarantee | ||
Diversified and Flexible Transportation Services | ![]() | Standard Policy |