PA-5250

Palo Alto Networks® PA-5200 Series of next-generation firewall appliances is comprised of the PA-5260, the PA-5250 and the PA-5220, which target at high-speed data center, internet gateway, and service provider deployments. The PA-5200 Series delivers up to 72 Gbps of throughput using dedicated processing and memory for the key functional areas of networking, security, threat prevention and management.

Model	PA-5250
Performance and Capacities Specifications
Firewall throughput (App-ID enabled)	35.9 Gbps
Threat prevention throughput	20.3 Gbps
IPsec VPN throughput	14 Gbps
Max sessions	8,000,000
New sessions per second	348,000
Virtual systems (base/max)	25/125
Networking Features
Interface Modes	L2, L3, Tap, Virtual wire (transparent mode) Point-to-point protocol over Ethernet (PPPoE) and DHCP supported for dynamic address assignment
Routing	OSPFv2/v3 with graceful restart, BGP with graceful restart, RIP, Static routing Policy-based forwarding Multicast: PIM-SM, PIM-SSM, IGMP v1, v2, and v3 Bidirectional Forwarding Detection (BFD)
IPv6	L2, L3, Tap, Virtual Wire (transparent mode) Features: App-ID, User-ID, Content-ID, WildFire, and SSL decryption SLAAC
IPsec VPN	Key exchange: Manual key, IKE v1 and IKEv2 (pre-shared key, certificate-based authentication) Encryption: 3DES, AES (128-bit, 192-bit, 256-bit) Authentication: MD5, SHA-1, SHA-256, SHA-384, SHA-512 GlobalProtect large-scale VPN (LSVPN) for simplified configuration and management
VLANs	802.1q VLAN tags per device/per interface: 4,094/4,094 Aggregate interfaces (802.3ad), LACP
Network Address Translation (NAT)	NAT modes (IPv4): static IP, dynamic IP, dynamic IP and port (port address translation) NAT64, NPTv6 Additional NAT features: Dynamic IP reservation, tun- able dynamic IP and port oversubscription
High Availability	Modes: Active/Active, Active/Passive Failure detection: Path monitoring, interface monitoring
Hardware Specifications
I/O	(4) 100/1000/10G Cu, (16) Gig/10Gig SFP/SFP+, (4) 40G/100G QSFP28
Management I/O	(2) 10/100/1000, (1) 40G/100G QSFP28 HA, (1) 10/100/1000 out-of-band management, (1) RJ45 console port
Storage Options	Dual Solid State Disk Drives
Storage Capacity	240GB SSD, RAID1, System Storage 2TB HDD, RAID1, Log Storage
Power (Max Power Consumption)	870 Watts
Max BTU/hr	2,970
Power Supplies (base/max)	1:1 Fully Redundant (2/2)
AC Input Voltage (input Hz)	100-240VAC (50-60Hz)
AC Power Supply Output	1200 Watt/power supply
Dimensions	5.25”H X 20.5”D X 17.25”W
Safety	cCSAus, CB IEC60950-1
EMI	FCC Class A, CE Class A, VCCI Class A
Environment
Operating temperature	32°F to 122°F (0° to 50°C)
Non-operating temperature	-20° to 70°C (-4°F to 158°F)